creating trust between NT and 2003

Sebastiaan · External Since: Apr 13, 2007 Posts: 3

I am trying to make a trust between an NT and 2003 domain.
So far I am able to make the trust that I can browse from the NT domain
(from the NT server itself) onto the 2003.

I used netdom on 2003 to make the trust in order to prevent SID filtering.
netdom trust <2k3 dom> /domain:<nt dom> /quarantine:no /UserD:<admin nt>
/PasswordD:<pwd nt> /UserO:<admin 2k3> /PasswordO:<pwd 2k3> /PasswordT:<pwd
trust> /Twoway /add

I get the message that the trust is created with SID filtering on.
I the same command again but without /add this time and I get the message
that the trust is adjusted to SID filter off.

But when I try to add the 2003 to the "trusted" list on NT I constantly get
the message:
"The password is incorrect."

In "Trusting domains" I used the same trust password as I used on the 2003
server.

I take it that it has to be possible to create a twoway trust between them,
but I am at a lose on how the get over this password message.
Any ideas or websites that would cover this?

Thank you for your time.

Sebastiaan

Michael Giorgio - 1 · External Since: Aug 25, 2003 Posts: 484

Hi Sebastiaan,

Have you seen the following::
How to establish trusts with a Windows NT-based domain in Windows Server
2003
http://support.microsoft.com/kb/325874/en-us

"Sebastiaan" <usul_atreides DeleteThis @hotmail.spam.no.com> wrote in message
news:%23l3cUjcfHHA.3884@TK2MSFTNGP04.phx.gbl...
>I am trying to make a trust between an NT and 2003 domain.
> So far I am able to make the trust that I can browse from the NT domain
> (from the NT server itself) onto the 2003.
>
> I used netdom on 2003 to make the trust in order to prevent SID filtering.
> netdom trust <2k3 dom> /domain:<nt dom> /quarantine:no /UserD:<admin nt>
> /PasswordD:<pwd nt> /UserO:<admin 2k3> /PasswordO:<pwd 2k3>
> /PasswordT:<pwd trust> /Twoway /add
>
> I get the message that the trust is created with SID filtering on.
> I the same command again but without /add this time and I get the message
> that the trust is adjusted to SID filter off.
>
> But when I try to add the 2003 to the "trusted" list on NT I constantly
> get the message:
> "The password is incorrect."
>
> In "Trusting domains" I used the same trust password as I used on the 2003
> server.
>
> I take it that it has to be possible to create a twoway trust between
> them, but I am at a lose on how the get over this password message.
> Any ideas or websites that would cover this?
>
> Thank you for your time.
>
> Sebastiaan
>

Sebastiaan · External Since: Apr 13, 2007 Posts: 3

Hadn't looked at that.

Trust is now set up, but now the messages about "no logonserver is
available" pop up.

How great 2000/2003 is compared to NT (when it comes to changing your
networksettings).
- change an outdated DNS entry, reboot.
- add WINS entry, reboot.

Those were the good old days. ~_^
And while it is the PDC, it's only used as main fileserver.

Hopefully this is properly work tomorrow.

Thanks for the pointer to the KB.

Sebastiaan

"Michael Giorgio - MS MVP" <Michael.Giorgio.RemoveThis@NoSpam.mayerson.com> wrote in
message news:%23AnvS2gfHHA.1216@TK2MSFTNGP03.phx.gbl...
> Hi Sebastiaan,
>
> Have you seen the following::
> How to establish trusts with a Windows NT-based domain in Windows Server
> 2003
> http://support.microsoft.com/kb/325874/en-us
>
> "Sebastiaan" <usul_atreides.RemoveThis@hotmail.spam.no.com> wrote in message
> news:%23l3cUjcfHHA.3884@TK2MSFTNGP04.phx.gbl...
>>I am trying to make a trust between an NT and 2003 domain.
>> So far I am able to make the trust that I can browse from the NT domain
>> (from the NT server itself) onto the 2003.
>>
>> I used netdom on 2003 to make the trust in order to prevent SID
>> filtering.
>> netdom trust <2k3 dom> /domain:<nt dom> /quarantine:no /UserD:<admin nt>
>> /PasswordD:<pwd nt> /UserO:<admin 2k3> /PasswordO:<pwd 2k3>
>> /PasswordT:<pwd trust> /Twoway /add
>>
>> I get the message that the trust is created with SID filtering on.
>> I the same command again but without /add this time and I get the message
>> that the trust is adjusted to SID filter off.
>>
>> But when I try to add the 2003 to the "trusted" list on NT I constantly
>> get the message:
>> "The password is incorrect."
>>
>> In "Trusting domains" I used the same trust password as I used on the
>> 2003 server.
>>
>> I take it that it has to be possible to create a twoway trust between
>> them, but I am at a lose on how the get over this password message.
>> Any ideas or websites that would cover this?
>>
>> Thank you for your time.
>>
>> Sebastiaan
>>
>
>