Daylight Savings Patch

PCR · External Since: Jun 21, 2004 Posts: 5941

Gary S. Terhune wrote:
| A LITTLE TRIMMING IS DUE FOR THIS THREAD, <S>.
|
| (Hey, I'm hard of hearing!)

I see you've already trimmed it. And I think this thread segment anyhow
is concluded. Everyone in world now agrees it must be done! OK, then.
And I've concluded two other thread segments with Colorado that may also
be somewhere in this thread. OK, then. OK, bye.

| --
|
| Gary S. Terhune
| MS-MVP Shell/User
|
| "PCR" <pcrrcp.DeleteThis@netzero.net> wrote in message
| news:OBgVdoHVHHA.4796@TK2MSFTNGP05.phx.gbl...
|> |
|> | I check the registry on one of the systems that I had patched and
|> | not tested by setting the time forward. Indeed,
|> | TimeZoneInformation was the old way. Then I set the time and
|> | applied it. Indeed TimeZoneInformation was ready for 2007. I
|> | had fallen prey to a version of the Heisenberg Uncertainty
|> | Principle. I am now a believer in the extra steps.
|>
|> OK. Very good, then. Too bad TZEdit just by itself wouldn't do that,
|> but its own instructions insist it must be done. It is also stated
|> in...
|>
|> http://support.microsoft.com/?kbid=914387
|> How to configure daylight saving time for the United States in 2007
|>
|> ...that it must be done. And Terhune agreed from the outset with John
|> John that it must be done.

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp.DeleteThis@netzero.net

Gary S. Terhune · External Since: Mar 17, 2004 Posts: 4357

"MEB" <meb@not real.RemoveThis@hotmail.com> wrote in message
news:eZ3xn5WVHHA.4632@TK2MSFTNGP04.phx.gbl...
>
>
>
> "Gary S. Terhune" <grystnews.RemoveThis@mvps.org> wrote in message
> news:eCgUyfLVHHA.1036@TK2MSFTNGP03.phx.gbl...
> | XP and 2K3 servers (couple of small SBS systems). I'll tackle Vista when
> I'm
> | a LOT healthier! But I'll always be here/there for 9x-ers.
> |
> | Thinking of starting a Windows Users' Group, and maybe assisting a
> couple
> of
> | different work prep programs for public agencies, including one mental
> | health rehab (out patient) system they're contemplating.
> |
> | Then again, I might find it more lucrative to get back into the
> therapeutic
> | massage business. It's a lot less mentally challenging and I'm damned
> good
> | at it. Just have to keep my center centered, IYKWIM.
> |
> | --
> |
> | Gary S. Terhune
> | MS-MVP Shell/User
>
> DANG GUY, slow down, don't try more than you should, ain't no
> wippersnapper
> no more yano...
> The therapeutic massage sounds good, heck you can drift off mentally when
> your doing that..
> BWDIK

Quite a lot, <s>...

No worry, none of this is happening any time soon. Be lucky if *any* of it
happens this year. Yeah, massage isn't too mentally challenging -- just
emotionally and spiritually challenging, <eg>.

--

Gary S. Terhune
MS-MVP Shell/User

MEB · External Since: Jan 05, 2006 Posts: 952

"Gary S. Terhune" <grystnews RemoveThis @mvps.org> wrote in message
news:Ou$8RVXVHHA.5108@TK2MSFTNGP06.phx.gbl...
| "MEB" <meb@not real RemoveThis @hotmail.com> wrote in message
| news:eZ3xn5WVHHA.4632@TK2MSFTNGP04.phx.gbl...
| >
| >
| >
| > "Gary S. Terhune" <grystnews RemoveThis @mvps.org> wrote in message
| > news:eCgUyfLVHHA.1036@TK2MSFTNGP03.phx.gbl...
| > | XP and 2K3 servers (couple of small SBS systems). I'll tackle Vista
when
| > I'm
| > | a LOT healthier! But I'll always be here/there for 9x-ers.
| > |
| > | Thinking of starting a Windows Users' Group, and maybe assisting a
| > couple
| > of
| > | different work prep programs for public agencies, including one mental
| > | health rehab (out patient) system they're contemplating.
| > |
| > | Then again, I might find it more lucrative to get back into the
| > therapeutic
| > | massage business. It's a lot less mentally challenging and I'm damned
| > good
| > | at it. Just have to keep my center centered, IYKWIM.
| > |
| > | --
| > |
| > | Gary S. Terhune
| > | MS-MVP Shell/User
| >
| > DANG GUY, slow down, don't try more than you should, ain't no
| > wippersnapper
| > no more yano...
| > The therapeutic massage sounds good, heck you can drift off mentally
when
| > your doing that..
| > BWDIK
|
| Quite a lot, <s>...
|
| No worry, none of this is happening any time soon. Be lucky if *any* of it
| happens this year. Yeah, massage isn't too mentally challenging -- just
| emotionally and spiritually challenging, <eg>.
|
| --
|
| Gary S. Terhune
| MS-MVP Shell/User

Well, if you could only teach that massage technique to your wife and
receive some of that... hehe...

Stay well, guy, whatever it takes.....

--
MEB
_______________

PCR · External Since: Jun 21, 2004 Posts: 5941

You are welcome. And remember to get your taxes done precisely at 11:59
PM April 17, 2007 or thereabouts...!...
http://taxes.about.com/od/2006taxes/qt/tax_calendar.htm

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp.DeleteThis@netzero.net
"Rubyjack" <rubyjack.DeleteThis@frontiernet.net> wrote in message
news:%23PktAWHYHHA.1296@TK2MSFTNGP02.phx.gbl...
Many thanks to those of you who have posted this help and similar one!

Dan

--

------------------------------------------------------------------------
-------
Madness takes its toll. Please have exact change.
------------------------------------------------------------------------
-------

"PCR" <pcrrcp.DeleteThis@netzero.net> wrote in message
news:O$GtUqJUHHA.4276@TK2MSFTNGP02.phx.gbl...
> MEB wrote:
> | "tom" <tadamsmar.DeleteThis@yahoo.com> wrote in message
> | news:1171379226.440834.250850@h3g2000cwc.googlegroups.com...
> || Anyone had experience with the patch from:
> ||
> || http://www.mdgx.com/add.htm#TZU
> ||
> || That is:
> ||
> || Q931836.exe
> ||
> || Thanks!
> ||
> || I have a number of 98 systems and I don't want to do them manually
if
> || I
> || can avoid it.
> ||
> |
> | That happens to be an update to a TZ "fix" that was discussed in
> | this forum via several threads.
> | To combat, or rather address other potential aspects which may be
> | related [or not] Gary Terhune MVP created [or is modifying/creating]
> | a TZ file for all versions of Windows, with the various issues
> | related to other areas of the world [if I remember correctly].
> |
> | http://www.grystmill.com/articles/tz_update.htm
>
> Subsequently, Terhune agreed with John John in another thread that
steps
> (g) though (j) [below] would also have to be done after running his
> .reg, but obviously not steps (a) through (h). Looks like the one
> from...
> http://www.mdgx.com/add.htm#TZU
> ...does it's own (g) through (j), though. Terhune had an objection to
> that one, though, for another reason.
>
> The following is required to do in the USA only...
>
> http://support.microsoft.com/?kbid=914387
> How to configure daylight saving time for the United States in 2007
> ......Quote.......
> INTRODUCTION
> Because of the Energy Policy Act, daylight saving time is extended by
> four weeks in 2007. This change starts on the second Sunday of March
and
> ends on the first Sunday of November.
> ......EOQ.........
>
> The time has come to follow the instructions in that article, or,
> perhaps a bit more clear...
>
> (a) Click TZEDIT.EXE.
> It opens with your time zone selected.
> (b) Click the Edit button.
> (c) Change the Start Day to... Second, Sunday, March.
> (d) Change the Last Day to... First, Sunday, November.
> (e) Click the OK button.
> (f) Click the Close button.
> (g) Click Start, point to Settings, point to Control Panel,
> and then double-click Date/Time.
> (h) Click the Time Zone tab.
> (i) Select a different time zone than (the one you are set at),
> and then click Apply.
> (j) Click (back to the one you were set at), and then click OK.
>
> "Note Steps i and j are required for the new changes to take effect",
> the article says, as does TZEdit's own help screen.
>
> Do so before March 11, 2007. If you cannot get TZEdit.exe from your
> personal copy of the Resource Kit, get it from the above article as
> Candlin saw or from...
>
ftp://ftp.microsoft.com/services/technet/samples/ps/Win98/Reskit/CONFIG/...,
> as Laura Fredericks did discover, after likely 1/2 ton of clicking
> (although she denies it).
>
> | --
> | MEB
> | http://peoplescounsel.orgfree.com/
> | BLOG - http://peoplescounsel.spaces.live.com/ Public Notice or the
> | "real world"
> | http://groups.google.com/group/the-peoples-law?hl=en - discussion
> | group for general aspects of Law verses the Peoples' of the world
> |
> | "Most people, sometime in their lives, stumble across truth.
> | Most jump up, brush themselves off, and hurry on about their
business
> | as if nothing had happen." Winston Churchill
> | Or to put it another way:
> | Morpheus can offer you the two pills;
> | but only you can choose whether you take the red pill or the blue
> | one. _______________
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp.DeleteThis@netzero.net
>
>

Not My Name · External Since: Dec 06, 2005 Posts: 65

This message is not archived

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

You have it correct.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
> Forgive me if I'm wrong, but shouldn't the START time for DST be at
> 2:00 am on the second Sunday in March? Also, Nowhere I read the month
> of October. To quote from PCR's master post:
>
> " United States
> Beginning in the spring of 2007, the start dates and end dates for
> daylight saving time (DST) will change to comply with the Energy
> Policy Act of 2005. DST dates for 2007 in the United States and Canada
> will start three weeks earlier (2:00 A.M. on the second Sunday in
> March), and will end one week later (2:00 A.M. on the first Sunday in
> November).
> ......EOQ............
>
>> b. Select the time that you want to start daylight saving time.
>> In other words, select 2:00 AM.
>> c. In the Last Day box, click the number of the day,
>> the corresponding day of the week, and the month that you want.
>> In other words, click Last, click Sunday, and then click
>> February.
>
> See above quote.
>
> If I'm wrong, please correct me as I do not want to confuse others nor
> myself.

Not My Name · External Since: Dec 06, 2005 Posts: 65

This message is not archived

Fred · External Since: Feb 06, 2007 Posts: 32

Well, for some reason it did not work on my W98SE ??? Had to change myself !
Fred

"Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
> You have it correct.
>
> --
> Gary S. Terhune
> MS-MVP Shell/User
> www.grystmill.com
>
> "Not My Name" <fakedphonyemail.RemoveThis@vinces.org> wrote in message
> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
> > 2:00 am on the second Sunday in March? Also, Nowhere I read the month
> > of October. To quote from PCR's master post:
> >
> > " United States
> > Beginning in the spring of 2007, the start dates and end dates for
> > daylight saving time (DST) will change to comply with the Energy
> > Policy Act of 2005. DST dates for 2007 in the United States and Canada
> > will start three weeks earlier (2:00 A.M. on the second Sunday in
> > March), and will end one week later (2:00 A.M. on the first Sunday in
> > November).
> > ......EOQ............
> >
> >> b. Select the time that you want to start daylight saving time.
> >> In other words, select 2:00 AM.
> >> c. In the Last Day box, click the number of the day,
> >> the corresponding day of the week, and the month that you want.
> >> In other words, click Last, click Sunday, and then click
> >> February.
> >
> > See above quote.
> >
> > If I'm wrong, please correct me as I do not want to confuse others nor
> > myself.
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

What didn't work? How did you try to patch the system? Using TZEdit? Using
my patch? How?

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Fred" <sorry@no can do.net> wrote in message
news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
> Well, for some reason it did not work on my W98SE ??? Had to change myself
> !
> Fred
>
> "Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
> news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
>> You have it correct.
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>> "Not My Name" <fakedphonyemail.RemoveThis@vinces.org> wrote in message
>> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
>> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
>> > 2:00 am on the second Sunday in March? Also, Nowhere I read the month
>> > of October. To quote from PCR's master post:
>> >
>> > " United States
>> > Beginning in the spring of 2007, the start dates and end dates for
>> > daylight saving time (DST) will change to comply with the Energy
>> > Policy Act of 2005. DST dates for 2007 in the United States and Canada
>> > will start three weeks earlier (2:00 A.M. on the second Sunday in
>> > March), and will end one week later (2:00 A.M. on the first Sunday in
>> > November).
>> > ......EOQ............
>> >
>> >> b. Select the time that you want to start daylight saving time.
>> >> In other words, select 2:00 AM.
>> >> c. In the Last Day box, click the number of the day,
>> >> the corresponding day of the week, and the month that you
>> >> want.
>> >> In other words, click Last, click Sunday, and then click
>> >> February.
>> >
>> > See above quote.
>> >
>> > If I'm wrong, please correct me as I do not want to confuse others nor
>> > myself.
>>
>>
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

What time zone are you in, Fred? It's important that your Time Zone be
properly set, including whether the current time is Std or DST, not just
that the clock be correct. That way, people and other machines know what
time it really is for your locale. Read my article at
http://grystmill.com/articles/tz_update.htm

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Fred" <sorry@no can do.net> wrote in message
news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
> Well, for some reason it did not work on my W98SE ??? Had to change myself
> !
> Fred
>
> "Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
> news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
>> You have it correct.
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>> "Not My Name" <fakedphonyemail.RemoveThis@vinces.org> wrote in message
>> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
>> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
>> > 2:00 am on the second Sunday in March? Also, Nowhere I read the month
>> > of October. To quote from PCR's master post:
>> >
>> > " United States
>> > Beginning in the spring of 2007, the start dates and end dates for
>> > daylight saving time (DST) will change to comply with the Energy
>> > Policy Act of 2005. DST dates for 2007 in the United States and Canada
>> > will start three weeks earlier (2:00 A.M. on the second Sunday in
>> > March), and will end one week later (2:00 A.M. on the first Sunday in
>> > November).
>> > ......EOQ............
>> >
>> >> b. Select the time that you want to start daylight saving time.
>> >> In other words, select 2:00 AM.
>> >> c. In the Last Day box, click the number of the day,
>> >> the corresponding day of the week, and the month that you
>> >> want.
>> >> In other words, click Last, click Sunday, and then click
>> >> February.
>> >
>> > See above quote.
>> >
>> > If I'm wrong, please correct me as I do not want to confuse others nor
>> > myself.
>>
>>
>
>

HoldOn · External Since: Mar 11, 2007 Posts: 2

On Sun, 11 Mar 2007 12:18:50 -0400, "Fred" <sorry@no can do.net>
wrote:

>Well, for some reason it did not work on my W98SE ??? Had to change myself !
>Fred

I really do not know if it worked for you.

I know it worked for me.

Used Gary Terhune fix, TZ_UP_9X. EXE.
http://www.vdare.com

PCR · External Since: Jun 21, 2004 Posts: 5941

I had come to almost believe that up-side-down people like Candlin may
legitimately change their dates in October. However, I'm willing to side
with Terhune & say you are correct-- that everyone must do it today!
Anyhow, TZEdit appears to have worked well for me.

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp DeleteThis @netzero.net
"Not My Name" <fakedphonyemail DeleteThis @vinces.org> wrote in message
news:53u6v2d87g767kd0kvt69fn8nfegtco7qq@4ax.com...
| On Sat, 10 Mar 2007 19:13:39 -0800, "Gary S. Terhune"
| <gryst DeleteThis @grystnews.com> wrote:
|
| >You have it correct.
|
| Anyway, it don't matter now.
|
| I did use your TZ_UP_9X.EXE immediately after that post.
|
| Thanks for your response, your Time Zone fix and all for your
| contributions to this NG.
|
| Best of luck.
|
|
|

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

The updates may or may not affect Mr. Candlin at all. If they do, then the
date DST ends is just as important as the date it begins. One or the other
occurs in the spring, one or the other occurs in the fall. By convention, MS
counts the date in effect for various TZ settings as per (Gregorian)
calendar year, so any changes should be made on or about Jan 1, each year. I
will be updating my own patch yearly, some time early in the Holiday season.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"PCR" <pcrrcp.DeleteThis@netzero.net> wrote in message
news:%238akViAZHHA.596@TK2MSFTNGP06.phx.gbl...
>I had come to almost believe that up-side-down people like Candlin may
> legitimately change their dates in October. However, I'm willing to side
> with Terhune & say you are correct-- that everyone must do it today!
> Anyhow, TZEdit appears to have worked well for me.
>
>
> --
> Thanks or Good Luck,
> There may be humor in this post, and,
> Naturally, you will not sue,
> Should things get worse after this,
> PCR
> pcrrcp.DeleteThis@netzero.net
> "Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
> news:53u6v2d87g767kd0kvt69fn8nfegtco7qq@4ax.com...
> | On Sat, 10 Mar 2007 19:13:39 -0800, "Gary S. Terhune"
> | <gryst.DeleteThis@grystnews.com> wrote:
> |
> | >You have it correct.
> |
> | Anyway, it don't matter now.
> |
> | I did use your TZ_UP_9X.EXE immediately after that post.
> |
> | Thanks for your response, your Time Zone fix and all for your
> | contributions to this NG.
> |
> | Best of luck.
> |
> |
> |
>
>

PCR · External Since: Jun 21, 2004 Posts: 5941

"Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
news:OiVE4sAZHHA.4560@TK2MSFTNGP03.phx.gbl...
| The updates may or may not affect Mr. Candlin at all. If they do, then
the
| date DST ends is just as important as the date it begins. One or the
other
| occurs in the spring, one or the other occurs in the fall. By
convention, MS
| counts the date in effect for various TZ settings as per (Gregorian)
| calendar year, so any changes should be made on or about Jan 1, each
year. I
| will be updating my own patch yearly, some time early in the Holiday
season.

Every year!? Is that for Mr. Candlin & other up-side-down people only?
Or are you expecting the U.S. to change the law again?

| --
| Gary S. Terhune
| MS-MVP Shell/User
| www.grystmill.com
|
| "PCR" <pcrrcp.DeleteThis@netzero.net> wrote in message
| news:%238akViAZHHA.596@TK2MSFTNGP06.phx.gbl...
| >I had come to almost believe that up-side-down people like Candlin
may
| > legitimately change their dates in October. However, I'm willing to
side
| > with Terhune & say you are correct-- that everyone must do it today!
| > Anyhow, TZEdit appears to have worked well for me.
| >
| >
| > --
| > Thanks or Good Luck,
| > There may be humor in this post, and,
| > Naturally, you will not sue,
| > Should things get worse after this,
| > PCR
| > pcrrcp.DeleteThis@netzero.net
| > "Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
| > news:53u6v2d87g767kd0kvt69fn8nfegtco7qq@4ax.com...
| > | On Sat, 10 Mar 2007 19:13:39 -0800, "Gary S. Terhune"
| > | <gryst.DeleteThis@grystnews.com> wrote:
| > |
| > | >You have it correct.
| > |
| > | Anyway, it don't matter now.
| > |
| > | I did use your TZ_UP_9X.EXE immediately after that post.
| > |
| > | Thanks for your response, your Time Zone fix and all for your
| > | contributions to this NG.
| > |
| > | Best of luck.
| > |
| > |
| > |
| >
| >
|
|

Fred · External Since: Feb 06, 2007 Posts: 32

Gary
I used TZ_UP_9X on two computers, Win98SE and Win98FE. I ran it yesterday
on both.
Also tried again to day after setting the time correctly but nothing
changed.
Fred

"Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
news:ejBTewAZHHA.3928@TK2MSFTNGP03.phx.gbl...
> What time zone are you in, Fred? It's important that your Time Zone be
> properly set, including whether the current time is Std or DST, not just
> that the clock be correct. That way, people and other machines know what
> time it really is for your locale. Read my article at
> http://grystmill.com/articles/tz_update.htm
>
> --
> Gary S. Terhune
> MS-MVP Shell/User
> www.grystmill.com
>
> "Fred" <sorry@no can do.net> wrote in message
> news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
> > Well, for some reason it did not work on my W98SE ??? Had to change
myself
> > !
> > Fred
> >
> > "Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
> > news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
> >> You have it correct.
> >>
> >> --
> >> Gary S. Terhune
> >> MS-MVP Shell/User
> >> www.grystmill.com
> >>
> >> "Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
> >> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
> >> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
> >> > 2:00 am on the second Sunday in March? Also, Nowhere I read the month
> >> > of October. To quote from PCR's master post:
> >> >
> >> > " United States
> >> > Beginning in the spring of 2007, the start dates and end dates for
> >> > daylight saving time (DST) will change to comply with the Energy
> >> > Policy Act of 2005. DST dates for 2007 in the United States and
Canada
> >> > will start three weeks earlier (2:00 A.M. on the second Sunday in
> >> > March), and will end one week later (2:00 A.M. on the first Sunday in
> >> > November).
> >> > ......EOQ............
> >> >
> >> >> b. Select the time that you want to start daylight saving time.
> >> >> In other words, select 2:00 AM.
> >> >> c. In the Last Day box, click the number of the day,
> >> >> the corresponding day of the week, and the month that you
> >> >> want.
> >> >> In other words, click Last, click Sunday, and then click
> >> >> February.
> >> >
> >> > See above quote.
> >> >
> >> > If I'm wrong, please correct me as I do not want to confuse others
nor
> >> > myself.
> >>
> >>
> >
> >
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

For anyone the law changes for, and for the Israelis and others who are
using a different calendar wherein the term "Second Sunday", or "third
Saturday" are nonsense and thus have to be translated.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"PCR" <pcrrcp.RemoveThis@netzero.net> wrote in message
news:ugw8HfBZHHA.4552@TK2MSFTNGP05.phx.gbl...
> "Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
> news:OiVE4sAZHHA.4560@TK2MSFTNGP03.phx.gbl...
> | The updates may or may not affect Mr. Candlin at all. If they do, then
> the
> | date DST ends is just as important as the date it begins. One or the
> other
> | occurs in the spring, one or the other occurs in the fall. By
> convention, MS
> | counts the date in effect for various TZ settings as per (Gregorian)
> | calendar year, so any changes should be made on or about Jan 1, each
> year. I
> | will be updating my own patch yearly, some time early in the Holiday
> season.
>
> Every year!? Is that for Mr. Candlin & other up-side-down people only?
> Or are you expecting the U.S. to change the law again?
>
> | --
> | Gary S. Terhune
> | MS-MVP Shell/User
> | www.grystmill.com
> |
> | "PCR" <pcrrcp.RemoveThis@netzero.net> wrote in message
> | news:%238akViAZHHA.596@TK2MSFTNGP06.phx.gbl...
> | >I had come to almost believe that up-side-down people like Candlin
> may
> | > legitimately change their dates in October. However, I'm willing to
> side
> | > with Terhune & say you are correct-- that everyone must do it today!
> | > Anyhow, TZEdit appears to have worked well for me.
> | >
> | >
> | > --
> | > Thanks or Good Luck,
> | > There may be humor in this post, and,
> | > Naturally, you will not sue,
> | > Should things get worse after this,
> | > PCR
> | > pcrrcp.RemoveThis@netzero.net
> | > "Not My Name" <fakedphonyemail.RemoveThis@vinces.org> wrote in message
> | > news:53u6v2d87g767kd0kvt69fn8nfegtco7qq@4ax.com...
> | > | On Sat, 10 Mar 2007 19:13:39 -0800, "Gary S. Terhune"
> | > | <gryst.RemoveThis@grystnews.com> wrote:
> | > |
> | > | >You have it correct.
> | > |
> | > | Anyway, it don't matter now.
> | > |
> | > | I did use your TZ_UP_9X.EXE immediately after that post.
> | > |
> | > | Thanks for your response, your Time Zone fix and all for your
> | > | contributions to this NG.
> | > |
> | > | Best of luck.
> | > |
> | > |
> | > |
> | >
> | >
> |
> |
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

Read my article. Apply the patch. Follow the post-patch instructions (which
should also be followed after using TZEdit.)

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Fred" <sorry@no can do.net> wrote in message
news:Ov$00qBZHHA.3928@TK2MSFTNGP03.phx.gbl...
> Gary
> I used TZ_UP_9X on two computers, Win98SE and Win98FE. I ran it
> yesterday
> on both.
> Also tried again to day after setting the time correctly but nothing
> changed.
> Fred
>
>
> "Gary S. Terhune" <gryst DeleteThis @grystnews.com> wrote in message
> news:ejBTewAZHHA.3928@TK2MSFTNGP03.phx.gbl...
>> What time zone are you in, Fred? It's important that your Time Zone be
>> properly set, including whether the current time is Std or DST, not just
>> that the clock be correct. That way, people and other machines know what
>> time it really is for your locale. Read my article at
>> http://grystmill.com/articles/tz_update.htm
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>> "Fred" <sorry@no can do.net> wrote in message
>> news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
>> > Well, for some reason it did not work on my W98SE ??? Had to change
> myself
>> > !
>> > Fred
>> >
>> > "Gary S. Terhune" <gryst DeleteThis @grystnews.com> wrote in message
>> > news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
>> >> You have it correct.
>> >>
>> >> --
>> >> Gary S. Terhune
>> >> MS-MVP Shell/User
>> >> www.grystmill.com
>> >>
>> >> "Not My Name" <fakedphonyemail DeleteThis @vinces.org> wrote in message
>> >> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
>> >> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
>> >> > 2:00 am on the second Sunday in March? Also, Nowhere I read the
>> >> > month
>> >> > of October. To quote from PCR's master post:
>> >> >
>> >> > " United States
>> >> > Beginning in the spring of 2007, the start dates and end dates for
>> >> > daylight saving time (DST) will change to comply with the Energy
>> >> > Policy Act of 2005. DST dates for 2007 in the United States and
> Canada
>> >> > will start three weeks earlier (2:00 A.M. on the second Sunday in
>> >> > March), and will end one week later (2:00 A.M. on the first Sunday
>> >> > in
>> >> > November).
>> >> > ......EOQ............
>> >> >
>> >> >> b. Select the time that you want to start daylight saving time.
>> >> >> In other words, select 2:00 AM.
>> >> >> c. In the Last Day box, click the number of the day,
>> >> >> the corresponding day of the week, and the month that you
>> >> >> want.
>> >> >> In other words, click Last, click Sunday, and then click
>> >> >> February.
>> >> >
>> >> > See above quote.
>> >> >
>> >> > If I'm wrong, please correct me as I do not want to confuse others
> nor
>> >> > myself.
>> >>
>> >>
>> >
>> >
>>
>>
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

Sorry...
http://grystmill.com/articles/tz_update.htm

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Fred" <sorry@no can do.net> wrote in message
news:Ov$00qBZHHA.3928@TK2MSFTNGP03.phx.gbl...
> Gary
> I used TZ_UP_9X on two computers, Win98SE and Win98FE. I ran it
> yesterday
> on both.
> Also tried again to day after setting the time correctly but nothing
> changed.
> Fred
>
>
> "Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
> news:ejBTewAZHHA.3928@TK2MSFTNGP03.phx.gbl...
>> What time zone are you in, Fred? It's important that your Time Zone be
>> properly set, including whether the current time is Std or DST, not just
>> that the clock be correct. That way, people and other machines know what
>> time it really is for your locale. Read my article at
>> http://grystmill.com/articles/tz_update.htm
>>
>> --
>> Gary S. Terhune
>> MS-MVP Shell/User
>> www.grystmill.com
>>
>> "Fred" <sorry@no can do.net> wrote in message
>> news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
>> > Well, for some reason it did not work on my W98SE ??? Had to change
> myself
>> > !
>> > Fred
>> >
>> > "Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
>> > news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
>> >> You have it correct.
>> >>
>> >> --
>> >> Gary S. Terhune
>> >> MS-MVP Shell/User
>> >> www.grystmill.com
>> >>
>> >> "Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
>> >> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
>> >> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
>> >> > 2:00 am on the second Sunday in March? Also, Nowhere I read the
>> >> > month
>> >> > of October. To quote from PCR's master post:
>> >> >
>> >> > " United States
>> >> > Beginning in the spring of 2007, the start dates and end dates for
>> >> > daylight saving time (DST) will change to comply with the Energy
>> >> > Policy Act of 2005. DST dates for 2007 in the United States and
> Canada
>> >> > will start three weeks earlier (2:00 A.M. on the second Sunday in
>> >> > March), and will end one week later (2:00 A.M. on the first Sunday
>> >> > in
>> >> > November).
>> >> > ......EOQ............
>> >> >
>> >> >> b. Select the time that you want to start daylight saving time.
>> >> >> In other words, select 2:00 AM.
>> >> >> c. In the Last Day box, click the number of the day,
>> >> >> the corresponding day of the week, and the month that you
>> >> >> want.
>> >> >> In other words, click Last, click Sunday, and then click
>> >> >> February.
>> >> >
>> >> > See above quote.
>> >> >
>> >> > If I'm wrong, please correct me as I do not want to confuse others
> nor
>> >> > myself.
>> >>
>> >>
>> >
>> >
>>
>>
>
>

Fred · External Since: Feb 06, 2007 Posts: 32

Gary I'm Eastern Time Zone, NC
Fred
"Fred" <sorry@no can do.net> wrote in message
news:Ov$00qBZHHA.3928@TK2MSFTNGP03.phx.gbl...
> Gary
> I used TZ_UP_9X on two computers, Win98SE and Win98FE. I ran it
yesterday
> on both.
> Also tried again to day after setting the time correctly but nothing
> changed.
> Fred
>
>
> "Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
> news:ejBTewAZHHA.3928@TK2MSFTNGP03.phx.gbl...
> > What time zone are you in, Fred? It's important that your Time Zone be
> > properly set, including whether the current time is Std or DST, not just
> > that the clock be correct. That way, people and other machines know what
> > time it really is for your locale. Read my article at
> > http://grystmill.com/articles/tz_update.htm
> >
> > --
> > Gary S. Terhune
> > MS-MVP Shell/User
> > www.grystmill.com
> >
> > "Fred" <sorry@no can do.net> wrote in message
> > news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
> > > Well, for some reason it did not work on my W98SE ??? Had to change
> myself
> > > !
> > > Fred
> > >
> > > "Gary S. Terhune" <gryst.DeleteThis@grystnews.com> wrote in message
> > > news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
> > >> You have it correct.
> > >>
> > >> --
> > >> Gary S. Terhune
> > >> MS-MVP Shell/User
> > >> www.grystmill.com
> > >>
> > >> "Not My Name" <fakedphonyemail.DeleteThis@vinces.org> wrote in message
> > >> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
> > >> > Forgive me if I'm wrong, but shouldn't the START time for DST be at
> > >> > 2:00 am on the second Sunday in March? Also, Nowhere I read the
month
> > >> > of October. To quote from PCR's master post:
> > >> >
> > >> > " United States
> > >> > Beginning in the spring of 2007, the start dates and end dates for
> > >> > daylight saving time (DST) will change to comply with the Energy
> > >> > Policy Act of 2005. DST dates for 2007 in the United States and
> Canada
> > >> > will start three weeks earlier (2:00 A.M. on the second Sunday in
> > >> > March), and will end one week later (2:00 A.M. on the first Sunday
in
> > >> > November).
> > >> > ......EOQ............
> > >> >
> > >> >> b. Select the time that you want to start daylight saving
time.
> > >> >> In other words, select 2:00 AM.
> > >> >> c. In the Last Day box, click the number of the day,
> > >> >> the corresponding day of the week, and the month that you
> > >> >> want.
> > >> >> In other words, click Last, click Sunday, and then click
> > >> >> February.
> > >> >
> > >> > See above quote.
> > >> >
> > >> > If I'm wrong, please correct me as I do not want to confuse others
> nor
> > >> > myself.
> > >>
> > >>
> > >
> > >
> >
> >
>
>

Gary S. Terhune · External Since: Feb 28, 2007 Posts: 110

Your message indicates that your machine is now on Eastern Daylight Time
(GMT - 0400). So it DID work.

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Fred" <sorry@no can do.net> wrote in message
news:eVxEVDCZHHA.4520@TK2MSFTNGP06.phx.gbl...
> Gary I'm Eastern Time Zone, NC
> Fred
> "Fred" <sorry@no can do.net> wrote in message
> news:Ov$00qBZHHA.3928@TK2MSFTNGP03.phx.gbl...
>> Gary
>> I used TZ_UP_9X on two computers, Win98SE and Win98FE. I ran it
> yesterday
>> on both.
>> Also tried again to day after setting the time correctly but nothing
>> changed.
>> Fred
>>
>>
>> "Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
>> news:ejBTewAZHHA.3928@TK2MSFTNGP03.phx.gbl...
>> > What time zone are you in, Fred? It's important that your Time Zone be
>> > properly set, including whether the current time is Std or DST, not
>> > just
>> > that the clock be correct. That way, people and other machines know
>> > what
>> > time it really is for your locale. Read my article at
>> > http://grystmill.com/articles/tz_update.htm
>> >
>> > --
>> > Gary S. Terhune
>> > MS-MVP Shell/User
>> > www.grystmill.com
>> >
>> > "Fred" <sorry@no can do.net> wrote in message
>> > news:OH259j$YHHA.4264@TK2MSFTNGP05.phx.gbl...
>> > > Well, for some reason it did not work on my W98SE ??? Had to change
>> myself
>> > > !
>> > > Fred
>> > >
>> > > "Gary S. Terhune" <gryst.RemoveThis@grystnews.com> wrote in message
>> > > news:uwsTEt4YHHA.3272@TK2MSFTNGP03.phx.gbl...
>> > >> You have it correct.
>> > >>
>> > >> --
>> > >> Gary S. Terhune
>> > >> MS-MVP Shell/User
>> > >> www.grystmill.com
>> > >>
>> > >> "Not My Name" <fakedphonyemail.RemoveThis@vinces.org> wrote in message
>> > >> news:a6h6v25g4qblc3av9nkv12ekufn8nvf867@4ax.com...
>> > >> > Forgive me if I'm wrong, but shouldn't the START time for DST be
>> > >> > at
>> > >> > 2:00 am on the second Sunday in March? Also, Nowhere I read the
> month
>> > >> > of October. To quote from PCR's master post:
>> > >> >
>> > >> > " United States
>> > >> > Beginning in the spring of 2007, the start dates and end dates for
>> > >> > daylight saving time (DST) will change to comply with the Energy
>> > >> > Policy Act of 2005. DST dates for 2007 in the United States and
>> Canada
>> > >> > will start three weeks earlier (2:00 A.M. on the second Sunday in
>> > >> > March), and will end one week later (2:00 A.M. on the first Sunday
> in
>> > >> > November).
>> > >> > ......EOQ............
>> > >> >
>> > >> >> b. Select the time that you want to start daylight saving
> time.
>> > >> >> In other words, select 2:00 AM.
>> > >> >> c. In the Last Day box, click the number of the day,
>> > >> >> the corresponding day of the week, and the month that you
>> > >> >> want.
>> > >> >> In other words, click Last, click Sunday, and then click
>> > >> >> February.
>> > >> >
>> > >> > See above quote.
>> > >> >
>> > >> > If I'm wrong, please correct me as I do not want to confuse others
>> nor
>> > >> > myself.
>> > >>
>> > >>
>> > >
>> > >
>> >
>> >
>>
>>
>
>