Printing problems via router Asus WL-500gPremium

Leonid · External Since: Mar 21, 2007 Posts: 3

I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
change OS from XP to Vista 32bit Business.
Now I can not print anithing.
If I install the port settings as ROW protocol (port 9100), printer starts
with printing normally, but it could not finish (as cycle job).
If I install the port setting as LPR protocol - nothing happend.

Alan Morris [MSFT] · External Since: Mar 02, 2006 Posts: 323

Does the router manual have instructions on the proper port configuration?

The manual should also have the queue name requirements if the device
supports the LPD.

I would also disable Bi-directional on the printer properties Ports tab
since Epson's normally attempt to perform ink status on the device that is
normally attached to the local system.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Leonid" <Leonid.RemoveThis@discussions.microsoft.com> wrote in message
news:F9A8AC6D-5C0E-4534-8B89-C8BEC14C34D9@microsoft.com...
>I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
> change OS from XP to Vista 32bit Business.
> Now I can not print anithing.
> If I install the port settings as ROW protocol (port 9100), printer starts
> with printing normally, but it could not finish (as cycle job).
> If I install the port setting as LPR protocol - nothing happend.

Leonid · External Since: Mar 21, 2007 Posts: 3

Router has not any instructions on port configuration.
And I did not see there any explanations about LPD...

So, I disabled bi-directional option - but result was the same.

"Alan Morris [MSFT]" wrote:

> Does the router manual have instructions on the proper port configuration?
>
> The manual should also have the queue name requirements if the device
> supports the LPD.
>
> I would also disable Bi-directional on the printer properties Ports tab
> since Epson's normally attempt to perform ink status on the device that is
> normally attached to the local system.
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Leonid" <Leonid.TakeThisOut@discussions.microsoft.com> wrote in message
> news:F9A8AC6D-5C0E-4534-8B89-C8BEC14C34D9@microsoft.com...
> >I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
> > change OS from XP to Vista 32bit Business.
> > Now I can not print anithing.
> > If I install the port settings as ROW protocol (port 9100), printer starts
> > with printing normally, but it could not finish (as cycle job).
> > If I install the port setting as LPR protocol - nothing happend.
>
>
>

Alan Morris [MSFT] · External Since: Mar 02, 2006 Posts: 323

I can't find this print device on the Epson website (I tried US, Canada,
Europe). Are you using a Vista driver?

Does the printer work when connected locally to the Vista machine?

If the print server does not document LPD it's probably not a supported
service so the LPR setting in Standard Port will send to a non existent
service.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Leonid" <Leonid.DeleteThis@discussions.microsoft.com> wrote in message
news:3E943A0C-CB4D-433C-91CA-3F28BBCD858E@microsoft.com...
> Router has not any instructions on port configuration.
> And I did not see there any explanations about LPD...
>
> So, I disabled bi-directional option - but result was the same.
>
> "Alan Morris [MSFT]" wrote:
>
>> Does the router manual have instructions on the proper port
>> configuration?
>>
>> The manual should also have the queue name requirements if the device
>> supports the LPD.
>>
>> I would also disable Bi-directional on the printer properties Ports tab
>> since Epson's normally attempt to perform ink status on the device that
>> is
>> normally attached to the local system.
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Leonid" <Leonid.DeleteThis@discussions.microsoft.com> wrote in message
>> news:F9A8AC6D-5C0E-4534-8B89-C8BEC14C34D9@microsoft.com...
>> >I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
>> > change OS from XP to Vista 32bit Business.
>> > Now I can not print anithing.
>> > If I install the port settings as ROW protocol (port 9100), printer
>> > starts
>> > with printing normally, but it could not finish (as cycle job).
>> > If I install the port setting as LPR protocol - nothing happend.
>>
>>
>>

Leonid · External Since: Mar 21, 2007 Posts: 3

1. I use driver for Vista 32 bit (latest version 5.9bE)
http://support.epson.ru/driver_list.asp?product=421
2. Printer work correctly when connected to the Vista mashine by USB.
3. When I used Windows XP, I had not any problems whith printing this way
(PC-Router-Printer).

"Alan Morris [MSFT]" wrote:

> I can't find this print device on the Epson website (I tried US, Canada,
> Europe). Are you using a Vista driver?
>
> Does the printer work when connected locally to the Vista machine?
>
> If the print server does not document LPD it's probably not a supported
> service so the LPR setting in Standard Port will send to a non existent
> service.
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Leonid" <Leonid DeleteThis @discussions.microsoft.com> wrote in message
> news:3E943A0C-CB4D-433C-91CA-3F28BBCD858E@microsoft.com...
> > Router has not any instructions on port configuration.
> > And I did not see there any explanations about LPD...
> >
> > So, I disabled bi-directional option - but result was the same.
> >
> > "Alan Morris [MSFT]" wrote:
> >
> >> Does the router manual have instructions on the proper port
> >> configuration?
> >>
> >> The manual should also have the queue name requirements if the device
> >> supports the LPD.
> >>
> >> I would also disable Bi-directional on the printer properties Ports tab
> >> since Epson's normally attempt to perform ink status on the device that
> >> is
> >> normally attached to the local system.
> >>
> >> --
> >> Alan Morris
> >> Windows Printing Team
> >> Search the Microsoft Knowledge Base here:
> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "Leonid" <Leonid DeleteThis @discussions.microsoft.com> wrote in message
> >> news:F9A8AC6D-5C0E-4534-8B89-C8BEC14C34D9@microsoft.com...
> >> >I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
> >> > change OS from XP to Vista 32bit Business.
> >> > Now I can not print anithing.
> >> > If I install the port settings as ROW protocol (port 9100), printer
> >> > starts
> >> > with printing normally, but it could not finish (as cycle job).
> >> > If I install the port setting as LPR protocol - nothing happend.
> >>
> >>
> >>
>
>
>