Config Files:
/boot/silo.conf
===========================================
# My silo.conf
partition = 1
default=kernel-2.6
root=/dev/hda1
timeout=100
append="ide=nodma"
image = /boot/vmlinux
label = vmlinux
image = /boot/vmlinux-2.6
label = vmlinux-2.6
image = /boot/kernel-2.6
label = kernel-2.6
image = /kernel-2.6
label = try
image = "cat /etc/msgs/hello.msg"
label = H
single-key
image = "ls -l /lib/modules/"
label = L
single-key
---END---
/etc/fstab
===========================================
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally
aren't
# needed; notail increases performance of ReiserFS (at the expense of
storage
# efficiency). It's safe to drop the noatime options if you want and
to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than
1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to
opts.
#/dev/hda1 /boot ext2 noauto,noatime 1 2
/dev/hda1 / ext2 noatime 0 1
/dev/hda2 none swap sw 0 0
/dev/hda4 /usr ext3 noatime 0 0
/dev/hda5 /var ext3 noatime 0 0
/dev/hda6 /home
e/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0
openprom /proc/openprom openpromfs defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
---END---
Kernel Config:
http://www.igorputina.com/temp/kernel.config
Linux