From: John Sheehan
A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
-suspect code indent for conditional statements
-please, no space before tabs
Signed-off-by: John Sheehan
---
drivers/staging/comedi/drivers/s626.c | 44 ++++++++++++++++----------------
1 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index b78d7ad..d5ba3ab 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -816,7 +816,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
MC_ENABLE(P_MC2, MC2_UPLD_IIC);
/* Invoke command upload */
while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
- ;
+ ;
/* and wait for upload to complete. */
/* Per SAA7146 data sheet, write to STATUS reg twice to
@@ -826,7 +826,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* Write I2C control: reset error flags. */
MC_ENABLE(P_MC2, MC2_UPLD_IIC); /* Invoke command upload */
while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
- ;
+ ;
/* and wait for upload to complete. */
}
@@ -866,14 +866,14 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
* not start up in a defined state after a PCI reset.
*/
-/* PollList = EOPL; // Create a simple polling */
-/* // list for analog input */
-/* // channel 0. */
+/* PollList = EOPL; // Create a simple polling */
+/* // list for analog input */
+/* // channel 0. */
/* ResetADC( dev, &PollList ); */
/* s626_ai_rinsn(dev,dev->subdevices,NULL,data); //( &AdcData ); // */
-/* //Get initial ADC */
-/* //value. */
+/* //Get initial ADC */
+/* //value. */
/* StartVal = data[0]; */
@@ -886,10 +886,10 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* for ( index = 0; index < 500; index++ ) */
/* { */
-/* s626_ai_rinsn(dev,dev->subdevices,NULL,data); */
-/* AdcData = data[0]; //ReadADC( &AdcData ); */
-/* if ( AdcData != StartVal ) */
-/* break; */
+/* s626_ai_rinsn(dev,dev->subdevices,NULL,data); */
+/* AdcData = data[0]; //ReadADC( &AdcData ); */
+/* if ( AdcData != StartVal ) */
+/* break; */
/* } */
/* end initADC */
@@ -1690,7 +1690,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
/* Wait for ADC done. */
while (!(RR7146(P_PSR) & PSR_GPIO2))
- ;
+ ;
/* Fetch ADC data. */
if (n != 0)
@@ -1723,7 +1723,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
/* Wait for ADC done. */
while (!(RR7146(P_PSR) & PSR_GPIO2))
- ;
+ ;
/* Fetch ADC data from audio interface's input shift register. */
@@ -2564,11 +2564,11 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
MC_ENABLE(P_MC2, MC2_UPLD_IIC);
while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
- ;
+ ;
/* Wait until I2C bus transfer is finished or an error occurs. */
while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
- ;
+ ;
/* Return non-zero if I2C error occured. */
return RR7146(P_I2CCTRL) & I2C_ERR;
@@ -2683,7 +2683,7 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
* cleared when the transfer has finished.
*/
while ((RR7146(P_MC1) & MC1_A2OUT) != 0)
- ;
+ ;
/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
@@ -2701,7 +2701,7 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
* to the output buffer register.
*/
while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0)
- ;
+ ;
/* Set up to trap execution at slot 0 when the TSL sequencer cycles
* back to slot 0 after executing the EOS in slot 5. Also,
@@ -2738,7 +2738,7 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
* out/in on SD2 the 0x00 that is always referenced by slot 5.
*/
while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0)
- ;
+ ;
}
/* Either (1) we were too late setting the slot 0 trap; the TSL
* sequencer restarted slot 0 before we could set the EOS trap flag,
@@ -2755,7 +2755,7 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
* from 0x00 to 0xFF.
*/
while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0)
- ;
+ ;
}
static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage)
@@ -2795,11 +2795,11 @@ static void DEBItransfer(struct comedi_device *dev)
/* Wait for completion of upload from shadow RAM to DEBI control */
/* register. */
while (!MC_TEST(P_MC2, MC2_UPLD_DEBI))
- ;
+ ;
/* Wait until DEBI transfer is done. */
while (RR7146(P_PSR) & PSR_DEBI_S)
- ;
+ ;
}
/* Write a value to a gate array register. */
@@ -3157,7 +3157,7 @@ static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
/*
* static uint16_t GetLatchSource(struct comedi_device *dev, struct enc_private *k )
* {
- * return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
+ * return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
* }
*/
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo.RemoveThis@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/ 
Linux