|
|
| Next: Deaniacs' Cheer Defiant Democratic Party Chief |
| Author |
Message |
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
 Posted: Fri Jul 15, 2005 4:49 pm Post subject: |
|
|
.......... :angry: .....just as the title states above for problem: :hmm: If i plug in ANY - type of "usb" 2.0 or 1.1 device into any of my usb port's, I get the problem/error screen shot (text showing below) ! ! ! :thumbdown: i would go into Device Manager and click onto what ever the device is showing in the "Disc drives" section and it would basically as to "REinstall Driver" . { USB driver's=????...confused as anything now= this is winXP with SP2...????}. . . . . . . this i get, with any type of device: Camera/Imaging device, Pen drives, External hhd 2.5 or 3.5.....etc...etc.....I was wondering if anyone has any idea of a fix for this or have i NOT gotten something "check-marked " right somewhere in my WinXP-Pro with SP2, and have all required updates???? much appreciate any help / suggestion's/ comment's in advance from here,......thx........
FOUND NEW HARDWARE WIZARD
Cannot Install this Hardware:
Generic STORAGE DEVICE USB Device
An error occured during the installation of the device
The specified service does not exist as an installed service
Click Finish to close wizard
click on these to see the "ERROR"
http://img270.echo.cx/img270/279/garbageagain2gv.jpg
http://img270.echo.cx/img270/1412/andagainthis8en.jpg
http://img270.echo.cx/img270/3261/whatajoke4wl.jpg
. . . . :angry: :dots:
. . . .{ sorry mod's, if i have posted this in the wrong area, please move to appropriate sector, thx.....} |
|
| Back to top |
|
 |
Fastway
Joined: Dec 14, 2002
Posts: 1951
|
| Posted: Sat Jul 16, 2005 11:49 am Post subject: |
|
|
|
| When did this start??? after a windows update ???
|
|
|
| Back to top |
|
|
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
| Posted: Sun Jul 17, 2005 2:13 am Post subject: |
|
|
| Quote: |
When did this start??? after a windows update ???
[right][snapback]278170[/snapback][/right]
|
......first off, thx Fastway for your reply on this matter & sorry if i didn't get back on this, sooner : . . . . . . did not notice this untill after some time of after the window's updates & SP2......someone told me that those driver's were suppose to be in the SP2.......so, I have just now tried to reinstall SP2, and still get the same result's.......
i am just wondering if i should start to "UN-install" each and every one of those window's updates :hmm: and see if one of those IS the culprit??? But, if I do end up doing so, and at the end = nothing has changed....  ....then would i be better off reinstalling all updates, or go through the WHOLE process of another reinstall of the OS again in less that a month.... <_< ... [ i have just yesterday, did the activation of this XP which had like 3 day's to go: see that's how long it's been for this reinstall of.....  ] but i know for a fact that after the reinstall of, i had SP1a; and then had a bunch of pictures i was looking at from my digital camera, and this was all working fine for then couple of weeks ago...... :unsure: ...sure wish this was one of those simle dumb fixes for my ignorce of..... :whistling: |
|
| Back to top |
|
|
Fastway
Joined: Dec 14, 2002
Posts: 1951
|
| Posted: Sun Jul 17, 2005 3:40 am Post subject: |
|
|
:hmm: How about safe mode?? can you get anything to work here?
Can you delete the devices that are giving you problems and reinstall them??
:hmm: :hmm: |
|
| Back to top |
|
|
goretsky
Joined: Dec 07, 2002
Posts: 8622
Location: Southern California
|
| Posted: Sun Jul 17, 2005 4:42 am Post subject: |
|
|
Hello,
Are there any USB peripherals at all already plugged into your computer when this problem occurs, such as a keyboard, mouse or printer? If so, does removing the device(s) before starting the computer (you'll want to plug in a PS/2 keyboard or mouse if it was a USB version of these devices you removed) and then plugging in the USB accessory still cause this message to appear?
Also, are you plugging the device directly into the USB connectors on your computer's motherboard, or into a PCI expansion card or hub?
Regards,
Aryeh Goretsky
|
|
| Back to top |
|
|
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
| Posted: Sun Jul 17, 2005 3:13 pm Post subject: |
|
|
| Quote: |
:hmm: How about safe mode?? can you get anything to work here?
Can you delete the devices that are giving you problems and reinstall them??
:hmm: :hmm:
[right][snapback]278311[/snapback][/right]
|
. . . . these device's i plugg in DO work, just get those "window's hardware- error's" when i do plug them in.........yes i have tried to delete/uninstall them from device manager, but upon rebooting and all then commence to plugg in any such usb device i get these "error'"s up again and all.......
|
|
| Back to top |
|
|
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
| Posted: Sun Jul 17, 2005 3:17 pm Post subject: |
|
|
| Quote: |
Hello,
Are there any USB peripherals at all already plugged into your computer when this problem occurs, such as a keyboard, mouse or printer? If so, does removing the device(s) before starting the computer (you'll want to plug in a PS/2 keyboard or mouse if it was a USB version of these devices you removed) and then plugging in the USB accessory still cause this message to appear?
Also, are you plugging the device directly into the USB connectors on your computer's motherboard, or into a PCI expansion card or hub?
Regards,
Aryeh Goretsky
[right][snapback]278316[/snapback][/right]
|
......as a matter of fact, i am using an Logitech mx1000 Lazer_ mice(usb).........i will give that a try right now on shutting down then installing a PS/2 mouse and have NO usb device hooked up and see what result's i wil get!!! ............thx Goretsky, for your reply on this matter.....  [ will be be back later and give result's of this.....]
. |
|
| Back to top |
|
|
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
| Posted: Mon Jul 18, 2005 12:48 am Post subject: |
|
|
| Quote: |
| Quote: |
Hello,
Are there any USB peripherals at all already plugged into your computer when this problem occurs, such as a keyboard, mouse or printer? If so, does removing the device(s) before starting the computer (you'll want to plug in a PS/2 keyboard or mouse if it was a USB version of these devices you removed) and then plugging in the USB accessory still cause this message to appear?
Also, are you plugging the device directly into the USB connectors on your computer's motherboard, or into a PCI expansion card or hub?
Regards,
Aryeh Goretsky
[right][snapback]278316[/snapback][/right]
|
......as a matter of fact, i am using an Logitech mx1000 Lazer_ mice(usb).........i will give that a try right now on shutting down then installing a PS/2 mouse and have NO usb device hooked up and see what result's i wil get!!! ............thx Goretsky, for your reply on this matter..... [ will be be back later and give result's of this.....]
.
[right][snapback]278408[/snapback][/right]
|
. . . welp, did no change of what so ever, thx anyway's for your suggestion there Goretsky.....i am now running system with only PS/2 periph's. and NO USB stuff what so ever......not prnt, scnnr, etc....etc.....still stump for this, tho..... :hmm:
and just a note when i was using usb periph's. , they were connected to the mthrbrd from the back of PC....I do have 4 ea. on front of my case, but only used when i need or wanting to plug in temporary stuff like these pen drv's, ext. hhd's. camera, the J-stx....etc....etc...........funny thing for that, itself, the J-stix work's = FINE ? ? ! ! ! :huh: :angry: ............but anything else i plugg in< the front or back jack's, & no HUB = that dang "ERROR of code 28"........ :dots: :angry: <_< :rant: |
|
| Back to top |
|
|
goretsky
Joined: Dec 07, 2002
Posts: 8622
Location: Southern California
|
| Posted: Mon Jul 18, 2005 1:46 am Post subject: |
|
|
Hello,
I noted in your screen shots that your printer has a memory card reader built into it. If you place a memory card into the slot on the printer, attach it to the computer via the USB port and then power up the system, are you then able to plug in and use other USB peripherals afterwards?
Regards,
Aryeh Goretsky
|
|
| Back to top |
|
|
mr. Charles
Joined: Jan 12, 2004
Posts: 12
|
| Posted: Tue Jul 19, 2005 2:08 pm Post subject: |
|
|
| Quote: |
Hello,
I noted in your screen shots that your printer has a memory card reader built into it. If you place a memory card into the slot on the printer, attach it to the computer via the USB port and then power up the system, are you then able to plug in and use other USB peripherals afterwards?
Regards,
Aryeh Goretsky
[right][snapback]278531[/snapback][/right]
|
. . . again, thx Goretsky; and all other's who have tried to help me with this prob, BUT>>>> i think i have gotten this system repaired, now: what i did was shut all down...completely, and disconnected the pwr spply_plug ; then commence to disconnect all and any usb device's attached....( ak: printer, scanner, USB mouse..and replaced with PS/2 for time being,....etc...etc.......ANYTHING usb >>>disconnect) ; then also disconnected from the " nic " card... any LAN/WAN connection disconnected; then, connected back up PSU and powered up and made sure of cleaned out prior to defragg......rebooted after that was completed..... :unsure: .....then back on the OS did an "reInstall" of SP2.... :whistling: .....Once this was completed and all, rebooted and " WaaaaLahhh ! ! ! :thumbup: all the usb slot's ( front or back ) now work with no prob's or error's! ! ! ! ....... :w00t:  .......commenced to shut down completely and reconnected other periph's, (usb)...but one by one.........and tested at the same time with pen drive.... :thumbup: :w00t: ......now all is complete & all working fine and dandy........ :thumbsup: :w00t-x100: :clap: :harhar: . . . . . . again thx to you other's out there that tried and gave help/suggestion's/comment's of, to help me out ; i hope my "fix" for here will help with other's out there with this such "headache-of-an ordeal"....... :angry:  :thumbup: |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
| |
|
|
General